[Maintenance of jacketed pot]
1. The power supply is equipped with a leakage protector according to the power, and the heat transfer oil is added before use.
2. It is strictly forbidden to start the machine without heat transfer oil in the interlayer.
3. It is recommended to use 320# heat transfer oil. It is recommended to replace the heat transfer oil once a year. If the working time is not long, the replacement time can be extended as appropriate.
4. After the work is over, close the oil valve, and then pour out the material inside the pot, being careful not to tilt outward.
5. It is recommended to use a standard copper core power cord above 6 mm.
6. To keep clean, the pot body should be cleaned every time it is used.
7. Regularly check the meshing degree of the worm gear and worm. If the gap is too large, it can be adjusted through the bearing on the worm.
8. The machine cannot work normally, you can check whether the fuse is blown, or whether the AC contactor is damaged, it is recommended to replace it.